-
ISO TS 19392-6 2023 Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6 Determination and evaluation of ice adhesion using centrifuge.pdf
-
ISO TS 21377 2023 Exchange formats for the audit data collection standard XML and J.pdf
-
ISO TS 21868 2023 Textile floor coverings — State of the art on maintenance and clea.pdf
-
ISO TS 24137 2023 Plain bearings — Surface modification by press fitting solid lubricants combined with micro dimple processing.pdf
-
ISO TS 27878 2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies.pdf
-
ISO TS 5094 2023 Nanotechnologies — Assessment of peroxidase-like activity of metal and metal oxide nanoparticles.pdf
-
GA-T 1359-2018 信息安全技术 信息资产安全管理产品 安全技术要求.pdf
-
GB 11032-89 交流无间隙金属氧化物避雷器.pdf
-
ISO 10651-4 2023 Lung ventilators — Part 4 Particular requirements for user-powered resuscitators.pdf
-
ISO 10791-2 2023 Test conditions for machining centres — Part 2 Geometric tests for machines with vertical spindle (vertical Z-axis).pdf
-
ISO 11174 2023 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method.pdf
-
ISO 11451-5 2023 Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5 Reverberation chamber.pdf
-
ISO 11992-2 2023 Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2 Application layer for brakes and running gear.pdf
-
ISO 11992-4 2023 Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4 Diagnostic communication.pdf
-
ISO 12625-12 2023 Tissue paper and tissue products — Part 12 Determination of tensile strength of perforated lines and calculation of perforation efficiency.pdf
-
ISO 12924 2023 Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specifications.pdf
-
ISO 13078-3 2023 Dentistry — Dental furnace — Part 3 Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple.pdf
-
ISO 13132 2023 Laboratory glassware — Petri dishes.pdf
-
ISO 13232-7 2005 Amd 2 2023 Motorcycles — Test and analysis procedures for research evaluati.pdf
-
ISO 13325 2019 Amd 1 2023 Tyres — Coast-by methods for measurement of tyre-to-road sound emission — Amendment 1 Uncertainties.pdf
-
ISO 13520 2023 Determination of ferrite content in austenitic stainless steel castings.pdf
-
ISO 13849-1 2023 Safety of machinery — Safety-related parts of control systems — Part 1 General principles for design.pdf
-
ISO 14002-2 2023 Environmental management systems — Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area — Part 2 Water.pdf
-
ISO 1407 2023 Rubber — Determination of solvent extract.pdf
-
ISO 14083 2023 Greenhouse gases — Quantification and reporting of greenhouse gas emissions arising from transport chain operations.pdf
-
ISO 14556 2023 Metallic materials — Charpy V-notch pendulum impact test — Ins.pdf
-
ISO 15259 2023 Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report.pdf
-
ISO 15370 2021 Amd 1 2023 Ships and marine technology — Low-location lighting (LLL) on passenger ships — Arrangement — Amendment 1.pdf
-
ISO 15730 2023 Metallic and other inorganic coatings — Electropolishing as a means of smoothing and passivating stainless steel.pdf
-
ISO 15739 2023 Photography — Electronic still-picture imaging — Noise measurements.pdf
-
ISO 16028 2023 Hydraulic fluid power — Dimensions and requirements of quick-action couplings, flush-face type.pdf
-
ISO 161-1 2018 Amd 1 2023 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1 Metric series — Amendment 1.pdf
-
ISO 16245 2023 Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents.pdf
-
ISO 16387 2023 Soil quality — Effects of contaminants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction.pdf
-
ISO 16976-5 2023 Respiratory protective devices — Human factors — Part 5 Thermal effects.pdf
-
ISO 16976-7 2023 Respiratory protective devices — Human factors — Part 7 Hearing and speech.pdf
-
ISO 17225-8 2023 Solid biofuels — Fuel specifications and classes — Part 8 Graded thermally treated and densified biomass fuels for commercial and industrial use.pdf
-
ISO 17401 2023 Space systems — Spacecraft interface requirements document for launch vehicle services.pdf
-
ISO 17499 2023 Carbonaceous materials used in the production of aluminium — Determination of baking level expressed by equivalent temperature.pdf
-
ISO 17663 2023 Welding — Quality requirements for heat treatment in connection with welding and allied processes.pdf
-
ISO 17889-2 2023 Ceramic tiling systems — Sustainability for ceramic tiles and installation materials — Part 2 Specification for tile installation materials.pdf
-
ISO 18123 2023 Solid biofuels — Determination of volatile matter.pdf
-
ISO 18274 2023 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification.pdf
-
ISO 18639-4 2018 Amd 1 2023 PPE ensembles for firefighters undertaking specific rescue activities — Part 4 Gloves — Amendment 1.pdf
-
ISO 18782 2023 Textiles — Determination of dynamic hygroscopic heat generation.pdf
-
ISO 188 2023 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests.pdf
-
ISO 19043 2023 Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method.pdf
-
ISO 19156 2023 Geographic information — Observations, measurements and samples.pdf
-
ISO 19157-1 2023 Geographic information — Data quality — Part 1 General requirements.pdf
-
ISO 19160-4 2023 Addressing — Part 4 International postal address components and template.pdf
-
ISO 19337 2023 Nanotechnologies — Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity.pdf
-
ISO 19388 2023 Sludge recovery, recycling, treatment and disposal — Requirements and recommendations for the operation of anaerobic digestion facilities.pdf
-
ISO 19408 2023 Footwear — Sizing — Vocabulary.pdf
-
ISO 19642-11 2023 Road vehicles — Automotive cables — Part 11 Dimensions and requirements for coaxial RF cables with a specified analogue bandwidth up to 6 GHz (20 GHz).pdf
-
ISO 19642-12 2023 Road vehicles — Automotive cables — Part 12 Dimensions and requirements for unscreened twisted pair RF cables with a specified analogue bandwidth up to 1 GHz.pdf
-
ISO 20045 2023 Measurement of the radioactivity in the environment — Air tritium — Test method using bubbler sampling.pdf
-
ISO 20297-2 2023 Industrial trucks — Lorry-mounted trucks — Part 2 Safe use requirements.pdf
-
ISO 20404 2023 Biotechnology — Bioprocessing — General requirements for the design of packaging to contain cells for therapeutic use.pdf
-
ISO 20560-2 2023 Safety information for the content of piping systems and tanks — Part 2 T.pdf
-
ISO 20567-4 2023 Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4 Mobile multi-impact testing on a small testing area.pdf
-
ISO 20658 2023 Requirements for the collection and transport of samples for medical laboratory examinations.pdf
-
ISO 20671-2 2023 Brand evaluation — Part 2 Implementation and reporting.pdf
-
ISO 20671-3 2023 Brand evaluation — Part 3 Requirements and recommendations for brands related to geographical indications.pdf
-
ISO 20715 2023 Tea — Classification of tea types.pdf
-
ISO 210 2023 Essential oils — General requirements and guidelines for packaging, conditioning and storage.pdf
-
ISO 211 2023 Essential oils — General requirements for labelling and marking of containers.pdf
-
ISO 21219-14 2023 Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 14 Parking information (TPEG2-PKI).pdf
-
ISO 21219-15 2023 Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15 Traffic event compact (TPEG2-TEC).pdf
-
ISO 21219-17 2023 Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) — Part 17 Speed information (TPEG2-SPI).pdf
-
ISO 21219-9 2023 Intelligent transport systems — Traffic and travel information (TTI) via tr.pdf
-
ISO 21349 2023 Space systems — Project reviews.pdf
-
ISO 21350 2023 Space systems — Off-the-shelf item utilization.pdf
-
ISO 22007-7 2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7 Transient measurement of thermal effusivity using a plane heat source.pdf
-
ISO 22183 2023 Plastics — Validation of force-time curves obtained from high-speed tensile.pdf
-
ISO 22342 2023 Security and resilience — Protective security — Guidelines for the development of a security plan for an organization.pdf
-
ISO 22476-5 2023 Geotechnical investigation and testing — Field testing — Part 5 Prebored pressuremeter test.pdf
-
ISO 22519 2023 Membrane-based generation of water for injection (WFI).pdf
-
ISO 226 2023 Acoustics — Normal equal-loudness-level contours.pdf
-
ISO 22712 2023 Refrigerating systems and heat pumps — Competence of personnel.pdf
-
ISO 22915-20 2023 Industrial trucks — Verification of stability — Part 20 Additional stability test for trucks operating in the special condition of offset load, offset by utilization.pdf
-
ISO 22932-4 2023 Mining — Vocabulary — Part 4 Prospecting and exploration.pdf
-
ISO 22935-1 2023 Milk and milk products — Sensory analysis — Part 1 Recruitment, selection, training and monitoring of assessors.pdf
-
ISO 22935-2 2023 Milk and milk products — Sensory analysis — Part 2 Methods for sensory evaluation.pdf
-
ISO 22935-3 2023 Milk and milk products — Sensory analysis — Part 3 Method for evaluation of compliance with product specifications for sensory properties by scoring.pdf
-
ISO 23298 2023 Dentistry — Test methods for machining accuracy of computer-aided milling machines.pdf
-
ISO 233-3 2023 Information and documentation — Transliteration of Arabic characters into Latin characters — Part 3 Persian language — Transliteration.pdf
-
ISO 23401-1 2023 Dentistry — Chairside denture base relining materials — Part 1 Hard type materials.pdf
-
ISO 23551-8 2023 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8 Multifunctional controls.pdf
-
ISO 23582-1 2023 Plastics and rubber machines — Clamping systems — Part 1 Safety requirements for magnetic clamping systems.pdf
-
ISO 23629-5 2023 UAS traffic management (UTM) — Part 5 UTM functional structure.pdf
-
ISO 23629-8 2023 UAS traffic management (UTM) — Part 8 Remote identification.pdf
-
ISO 23684 2023 Road vehicles — Technical personnel dealing with natural gas vehicles (NGVs) — Training and qualification.pdf
-
ISO 23701 2023 Optics and photonics — Laser and laser-related equipment — Photothermal technique for absorption measurement and mapping of optical laser components.pdf
-
ISO 23704-3 2023 General requirements for cyber-physically controlled smart machine tool systems (CPSMT) — Part 3 Reference architecture of CPSMT for additive manufacturing.pdf
-
ISO 23772 2023 Pulps — Kraft liquor — Determination of residual alkali using potentiometric titration.pdf
-
ISO 23774 2023 Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration.pdf
-
ISO 23777 2023 Pulps — Kraft liquor — Determination of hydrosulphide ion concentration using potentiometric titration.pdf
-
ISO 23780-1 2023 Ships and marine technology — Procedure for testing the performance of continuous monitoring TRO sensors used in ships — Part 1 DPD sensors.pdf
-
ISO 23807 2023 Ships and marine technology — General requirements for the asynchronous time-insensitive ship-shore data transmission.pdf
-
ISO 23820 2023 Determination of the filtration efficiency of urea filter modules.pdf
-
ISO 23949 2023 Plastics — Application of spread of flame test to plastic pipes.pdf
-
ISO 24113 2023 Space systems — Space debris mitigation requirements.pdf
-
ISO 24131-1 2023 Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1 Polyurethane lining.pdf
-
ISO 24131-2 2023 Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2 Epoxy lining.pdf
-
ISO 24190 2023 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses.pdf
-
ISO 24352 2023 Technical requirements for small unmanned aircraft electric energy systems.pdf
-
ISO 24355 2023 Flight control system for civil small and light multicopter unmanned aircraft system (UAS) — General requirements.pdf
-
ISO 24469 2023 Road wear test of studded tyres.pdf
-
ISO 24482 2023 Large yachts — Navigational bridge visibility.pdf
-
ISO 24540 2023 Principles for effective and efficient corporate governance of water utilities.pdf
-
GA T2064-2023 法庭科学 生物检材中113种农药及代谢物筛选 液相色谱-质谱法.pdf
-
GA1333-2017车辆驾驶人员体内毒品含量阈值与检验.pdf
-
GB 13788-2024 冷轧带肋钢筋.pdf
-
GB 2023-2003 食品添加剂 乳酸.pdf
-
GB T 43947-2024 低速线控底盘通用技术要求.pdf
-
GB T18691-2002 农业灌溉设备 止回阀.pdf
-
GB-T 1507-2006 锰矿石 有效氧含量的测定 重铬酸钾滴定法.pdf
-
GB-T 1508-2002 锰矿石 全铁含量的测定 重铬酸钾滴定法和邻菲啰啉分光光度法.pdf
-
GB-T 15087-2009 道路车辆 牵引车与牵引杆挂车机械连接装置 强度试验.pdf
-
GB-T 15088-2009 道路车辆 牵引销 强度试验.pdf
-
GB-T 15149.1-2002 电力系统远方保护设备的性能及试验方法 第1部分 命令系统.pdf
-
GB-T 15152-2006 脉冲噪声干扰引起移动通信性能降级的评定方法.pdf
-
GB-T 15171-1994 软包装件密封性能试验方法.pdf
-
GB-T 15223-2008 塑料 液体树脂 用比重瓶法测定密度.pdf
-
GB-T 15247-2008 微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法.pdf
-
GB-T 15251-2008 橡胶 游离硫的测定.pdf
-
GB-T 15332-1994 热熔胶粘剂软化点的测定 环球法.pdf
-
GB-T 15333-1994 绝缘用胶粘带电腐蚀试验方法.pdf
-
GB-T 15339-2008 橡胶配合剂 炭黑 在丁腈橡胶中的鉴定方法.pdf
-
GB-T 15340-2008 天然、合成生胶取样及其制样方法.pdf
-
GB-T 1539-2007 纸板耐破度的测定.pdf
-
GB-T 15397-1994 电影录音控制室、鉴定放映室及室内影院A环、B环电声频率响应特性测量方法.pdf
-
GB-T 1540-2002 纸和纸板吸水性的测定(可勃法).pdf
-
GB-T 15401-1994 水果、蔬菜及其制品 亚硝酸盐和硝酸盐含量的测定.pdf
-
GB-T 1543-2005 纸和纸板 不透明度(纸背衬)的测定(漫反射法).pdf
-
GB-T 15430-1995 红外探测器环境试验方法.pdf
-
GB-T 15445.1-2008 粒度分析结果的表述 第1部分:图形表征.pdf
-
GB-T 1545-2008 纸、纸板和纸浆 水抽提液酸度或碱度的测定.pdf
-
GB-T 15451-2006 工业循环冷却水 总碱及酚酞碱度的测定.pdf
-
GB-T 15452-2009 工业循环冷却水中钙、镁离子的测定 EDTA滴定法.pdf
-
GB-T 15454-2009 工业循环冷却水中钠、铵、钾、镁和钙离子的测定 离子色谱法.pdf
-
GB-T 15457-1995 胶片与片基润滑度测定方法.pdf
-
GB-T 15458-2006 煤的磨损指数测定方法.pdf
-
GB-T 15469.2-2007 水轮机、蓄能泵和水泵水轮机空蚀评定 第2部分:蓄能泵和水泵水轮机的空蚀评定.pdf
-
GB-T 15470-2002 家用直接作用式房间电加热器性能测试方法.pdf
-
GB-T 15484-1995 声学 轰声物理特性的描述和测量.pdf
-
GB-T 15519-2002 化学转化膜 钢铁黑色氧化膜 规范和试验方法.pdf
-
GB-T 1558-2009 硅中代位碳原子含量 红外吸收测量方法.pdf
-
GB-T 15590-2008 显微煤岩类型测定方法.pdf
-
GB-T 15622-2005 液压缸试验方法.pdf
-
GB-T 15647-1995 稳态可用性验证试验方法.pdf
-
GB-T 15651.3-2003 半导体分立器件和集成电路 第5-3部分 光电子器件 测试方法.pdf
-
GB-T 15662-1995 导电、防静电塑料体积电阻率测试方法.pdf
-
GB-T 15665-1995 豆类 配糖氢氰酸含量的测定.pdf
-
GB-T 15666-1995 豆类试验方法.pdf
-
GB-T 15683-2008 大米 直链淀粉含量的测定.pdf
-
GB-T 15686-2008 高粱 单宁含量的测定.pdf
-
GB-T 15687-2008 动植物油脂 试样的制备.pdf
-
GB-T 15688-2008 动植物油脂 不溶性杂质含量的测定.pdf
-
GB-T 15690-2008 植物油料 含油量测定 连续波低分辨率核磁共振测定法 快速法.pdf
-
GB-T 15708-1995 交流电气化铁道电力机车运行产生的无线电辐射干扰的测量方法.pdf
-
GB-T 15716-2005 煤用筛分设备工艺性能评定方法.pdf
-
GB-T 15738-2008 导电和抗静电纤维增强塑料电阻率试验方法.pdf
-
GB-T 15812.1-2005 非血管内导管 第1部分 一般性能试验方法.pdf
-
GB-T 15816-1995 洗涤剂和肥皂中总二氧化硅含量的测定 重量法.pdf
-
GB-T 15817-1995 洗涤剂中无机硫酸盐含量的测定 重量法.pdf
-
GB-T 15819-2006 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求.pdf
-
GB-T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验.pdf
-
GB-T 15821-1995 金属覆盖层 延展性测量方法.pdf
-
GB-T 15822.2-2005 无损检测 磁粉检测 第2部分:检测介质.pdf
-
GB-T 15822.3-2005 无损检测 磁粉检测 第3部分:设备.pdf
-
GB-T 15823-2009 无损检测 氦泄漏检测方法.pdf
-
GB-T 15828-1995 V带和多楔带传动 节线位置的动态测定.pdf
-
GB-T 15868-1995 全球海上遇险与安全系统(CMDSS) 船用无线电设备和海上导航设备通用要求测试方法和要求的测试结果.pdf
-
GB-T 15903-1995 压敏胶粘带耐燃性试验方法 悬挂法.pdf
-
GB-T 15905-1995 硫化橡胶湿热老化试验方法.pdf
-
GB-T 15907-2008 橡胶和塑料软管 可燃性试验方法.pdf
-
GB-T 15941-2008 同步数字体系 SDH 光缆线路系统进网要求.pdf
-
GB-T 15959-1995 水质 可吸附有机卤素(AOX ) 的测定 微库仑法.pdf
-
GB-T 15964-2008 地毯 单位长度和单位面积绒簇或绒圈数目的测定方法.pdf
-
GB-T 15965-2008 手工地毯 绒头长度的测定方法.pdf
-
GB-T 15969.7-2008 可编程序控制器 第7部分:模糊控制编程.pdf
-
GB-T 15970.2-2000 金属和合金的腐蚀 应力腐蚀试验 第2部分 弯梁试样的制备和应用.pdf
-
GB-T 15970.3-1995 金属和合金的腐蚀 应力腐蚀试验 第3部分 U型弯曲试样的制备和应用.pdf
-
GB-T 15970.4-2000 金属和合金的腐蚀 应力腐蚀试验 第4部分 单轴加载拉伸试样的制备和应用.pdf
-
GB-T 15970.5-1998 金属和合金的腐蚀 应力腐蚀试验 第5部分 C型环试样的制备和应用.pdf
-
GB-T 15970.6-2007 金属和合金的腐蚀 应力腐蚀试验 第6部分:恒载荷或恒位移下的预裂纹试样的制备和应用.pdf
-
GB-T 15970.8-2005 金属和合金的腐蚀 应力腐蚀试验 第8部分 焊接试样的制备和应用.pdf
-
GB-T 15970.9-2007 金属和合金的腐蚀 应力腐蚀试验 第9部分:渐增式载荷或渐增式位移下的预裂纹试样的制备和应用.pdf
-
GB-T 15972.21-2008 光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数.pdf
-
GB-T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数.pdf
-
GB-T 15972.40-2008 光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减.pdf
-
GB-T 15972.46-2008 光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化.pdf
-
GB-T 15972.50-2008 光纤试验方法规范 第50部分:环境性能的测量方法和试验程序 恒定湿热.pdf
-
GB-T 15972.51-2008 光纤试验方法规范 第51部分 环境性能的测量方法和试验程序 干热.pdf
-
GB-T 15972.52-2008 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环.pdf
-
GB-T 15972.53-2008 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水.pdf
-
GB-T 1601-1993 农药pH值的测定方法.pdf
-
GB-T 1602-2001 农药熔点测定方法.pdf
-
GB-T 1603-2001 农药乳液稳定性测定方法.pdf
站内资源均来自网友分享或网络收集整理,若无意中侵犯到您的权利,敬请联系我们
微信(点击查看客服),我们将及时删除相关资源。